# jBASE Performance Benchmarking

Created At: 3/18/2019 10:45:32 PM
Updated At: 3/18/2019 11:03:31 PM
Original Doc: jbase-performance-benchmarking
Original ID: 373594
Internal: Yes

#

There are now a couple of sets of programs that
enable comparative benchmarks of jBASE. They can be used to compare jBASE
against itself, for example is a new build showing any performance improvements.
They can also be used to compare jBASE against other MultiValue platforms.

This
benchmark has 64 different MultiValue BASIC instructions that it times. Each
BASIC instruction test can have 3 variations, small, medium and large, and
these variations are intended to run the BASIC instruction with different sizes
of data. For example, it might compare the INDEX() function against a small
string, a medium string and a large string.

You
run one of these tests and it will provide a Radband rating for each individual
test and then a final figure of the Radband rating as a whole. The Radband
rating is the inverse uselessness of performance: the higher the value, the
better the instruction performs. A Radband rating of 1.0 is the reference value
obtained when the tests were first written and were run on a reference platform
-- A Pentium chip running at 400MHz. We would therefore hope that on a modern CPU,
the Radband rating is always way above 1.

# SINGLE test benchmark

Each
test run is written to the RESULTS directory. You can then run a command to
compare different results.

# MULTI test benchmark

This benchmark is
intended as a "real life" multi user application and is very useful
for getting a single value describing the TPS of the system.

# Installing and
running the benchmarks

Ensure you are set up as
a jBASE user, the same jBASE user that you want to run the benchmark:

jbase-centos-~: WHO
1
1 fb
1

Change to the benchmark directory like this:

jbase-centos-~: cd ~/src/Tools/Benchmarks
1
jbase-centos-~/src/Tools/Benchmarks: ls RESULTS
1
bin    data         install  lib  setup   singletest.h RESULTS]D  clean  dhrystone.c  jbackup  s1   single  whetstone.c
1

Establish some environment variables:

Note
the use of periods , it isn't "./setup" it is ". ./setup".

jbase-centos-~/src/Tools/Benchmarks: . ./setup
1
jbase-centos-~/src/Tools/Benchmarks:
1

Clean up any residual noise from a previous benchmark:

jbase-centos-~/src/Tools/Benchmarks: ./clean
1
Cleaning up the benchmark tests
1
jbase-centos5-~/src/Tools/Benchmarks:
1

Install the benchmarks, which will build the programs in a new lib and bin directory, avoiding cross
contamination with anything else on your system.

jbase-centos-~/src/Tools/Benchmarks: ./install
1
Creating SYSTEM file
1
[ 417 ] File ./SYSTEM]D created , type = J4
1
[ 417 ] File ./SYSTEM created , type = J4
1
Creating SYSTEM file
1
[ 417 ] File /home/fb/src/Tools/Benchmarks/data/MD]D created , type = J4
1
245 Items copied from /home/fb/5.0_rels/jbcdev5.6.0/src/MD TO /home/fb/src/Tools/Benchmarks/data/MD
1
[ 417 ] File TESTER-PROC]D created , type = J4
1
[ 417 ] File TESTER-PROC created , type = J4
1
MESSAGE.CHECK
1
Source file MESSAGE.CHECK compiled successfully
1
CF.TKLR
1
Source file CF.TKLR compiled successfully
1
CFSCREEN300
1
Source file CFSCREEN300 compiled successfully
1
 
1
[ Some lines of output removed for brevity and clarity ]
1
 
1
TEST04
1
Object TEST04 cataloged successfully
1
Library /home/fb/src/Tools/Benchmarks/lib/lib1.so.3 rebuild okay
1
 
1
Running the raw CPU benchmarks for this platform
1
Please note these values so you can evaluate different
1
tests run on different hardware platforms
1
 
1
Dhrystone time for 1000000000 passes = 35.96
1
This machine benchmarks at 27.8 Million Dhrystones/Second
1
Whetstone time for 500000 passes = 34.95
1
This machine benchmarks at 1431 Million Whetstone/Second - MWIPS
1
 
1
There are now 2 benchmarks to choose from
1
 
1
(1) The CUBS multi-user benchmarks
1
    Create files using CREATE.FILES
1
    RUN-SIMULATOR to actually run a benchmark
1
(2) The single instruction benchmarks
1
    SINGLETEST -- runs a test with single instructions benchmarks
1
    SINGLEDIFF -- compares two previously executed tests
1
jbase-centos-~/src/Tools/Benchmarks:
1

# Info

At the end of the install script, it runs a couple of simple CPU-centric
benchmarks. They are standard dhrystone and whetstone tests, and are useful to
enable us to measure the relative CPU performance of the platform. This enables
us to compare different benchmarks that have been run on different CPUs, and
take into account the CPU speed. The dhrystone test simply runs general CPU
instructions, whereas the whetstone is more concerned with floating point
operations.

Run the SINGLE instruction benchmarks

As
per the output displayed at the end of step (6) shown above, simply execute
'SINGLETEST' and this will run the benchmarks. Each test takes 10 seconds.

You
can use the (H) option to SINGLETEST to run in half the time (5 seconds per
test) or the (Q) option to run in a quarter of the time (2.5 seconds per test).
The results are all relative so running for a shorter time will not seriously
impact the results -- although as with any benchmark, the longer the test, the
more accurate the results.

jbase-centos-~/src/Tools/Benchmarks: SINGLETEST \(Q
1
Enter the test identifier, e.g. R83 , JBase  : Centos10.28.32.22
1
Enter the hardware name, e.g. Sun , Intel P400, Alpha 266  : Intel
1
Enter the operating system name and version, e.g. AIX 4.2 , Unixware 7.0  : Centos
1
Enter the MultiValue software and release, e.g. jBASE 3.2 , mvBase 2.1.2  : jBASE 5.5
1
Enter general notes abot this test, e.g. Beta trial of jBASE  : This is just a test
1
Enter a list of tests from 1 upwards, separated by spaces  : *
1
Creating scratch files ...
1
Allow time for the created files to flush to disk ...
1
Begin benchmark tests ...
1
1   , FOR/NEXT loop        , small   , loops 28     , category B , CPU 2.517   , Radband rating 0.8301
1
1   , FOR/NEXT loop        , medium  , loops 35     , category B , CPU 2.512   , Radband rating 0.9743
1
1   , FOR/NEXT loop        , large   , loops 23     , category B , CPU 2.565   , Radband rating 0.7005
1
2   , LOOP UNTIL DO REPEAT , small   , loops 642    , category B , CPU 2.502   , Radband rating 20.0464
1
2   , LOOP UNTIL DO REPEAT , medium  , loops 630    , category B , CPU 2.502   , Radband rating 19.6717
1
 
1
[ Lots of lines of output removed for brevity and clarity ]
1
 
1
62  , DELETE function      , large   , loops 385    , category S , CPU 2.502   , Radband rating 12.6128
1
63  , PRINT null           , small   , loops 88     , category O , CPU 2.526   , Radband rating 1.9036
1
64  , LOCK/RELEASE         , small   , loops 131    , category D , CPU 2.516   , Radband rating 2.925
1
64  , LOCK/RELEASE         , medium  , loops 126    , category D , CPU 2.508   , Radband rating 3.4888
1
 
1
Average Radband rating = 9.242 over 156 tests
1
 
1
Results written to record 'results.Centos10.28.32.22' in file 'RESULTS'
1
jbase-centos-~/src/Tools/Benchmarks:
1
jbase-centos-~/src/Tools/Benchmarks: ls RESULTS
1
results.Centos10.28.32.22  results.jbase5.5
1
results.jbase3.4           results.jbase5.5CI
1

As
you can see, a new entry has been written to the RESULTS directory called
results.Centos10.28.32.22 which describes these results. You can display these
results again with SINGLEDIFF, or compare with other benchmarks using
SINGLEDIFF.

Below
is an example of running SINGLEDIFF to print the results of just one benchmark
result. Enter a <RETURN> when asked for the second test and it will use
the reference values where all the Radband values are 1 -- in other words, it
just displays the results from the test.

jbase-centos-~/src/Tools/Benchmarks: SINGLEDIFF
1
1     jbase5.5CI
1
2     Centos10.28.32.22
1
3     jbase5.5
1
4     jbase3.4
1
Enter the identifier for the first test  (?) : 2
1
Enter the identifier for the second test (?) :
1
 
1
jBASE benchmark comparison report at 13:14:57  29 APR 2016
1
 
1
                                        Reference test         Comparison test
1
Test identifier                         Centos10.28.32.22
1
Original date of test                   03 DEC 1998 12:54:38   29 APR 2016 13:04:42
1
Hardware                                Intel P400             Intel
1
Operating system                        Red Hat Linux 5.2      Centos
1
Software                                jBASE 3.1.8            jBASE 5.5
1
Notes                                   Reference test         This is just a test
1
 
1
The following table shows the relative performance of the two mentioned
1
benchmark runs. For each test there can be between 1 and 3 columns of
1
values, the first being the standard test, the second column (optional)
1
being an extended version and the third column (optional) being a severe
1
test. The value is a ratio between the execution time of the first benchmark
1
result (Centos10.28.32.22) and the second benchmark result (). Therefore if a
1
value of LESS than 1 is shown, it shows 'Centos10.28.32.22' is the better performer,
1
whereas a value of GREATER than 1 shows '' is the better performer.
1
 
1
 
1
For sub-category Assignment
1
---------------------------
1
21 Assign = 0                           49.2332
1
22 Assign = 1                           51.5617
1
23 Assign = 2                           51.5491
1
24 Assign small strings                 6.3473    7.5225    2.4886
1
25 Assign large strings                 11.3386   15.3397   5.2223
1
57 Variable assignment                  6.7183    12.8582   44.6124
1
58 1 dimensioned array extraction       9.5681    5.3504
1
59 2 dimensioned array extraction       9.3922    7.2197
1
 
1
Sub-category averages for Assignment    24.4636   9.6581    17.4411
1
Sub-category weighted for Assignment    16.5711   8.9465    8.3386
1
 
1
For sub-category Branch
1
-----------------------
1
01 FOR/NEXT loop                        0.8302    0.9743    0.7005
1
02 LOOP UNTIL DO REPEAT                 20.0465   19.6718   6.4219
1
03 CALL no parameters                   2.3002
1
04 CALL @ no parameters                 4.3824
1
05 CALL with one parameter              2.4476    2.4150    2.7672
1
06 GOTO                                 1.0737
1
07 GOSUB                                24.3479   17.3795
1
08 IF/THEN                              1.1273    2.3316    2.3390
1
 
1
Sub-category averages for Branch        7.0695    8.5544    3.0572
1
Sub-category weighted for Branch        3.2386    4.5147    2.3229
1
 
1
For sub-category Database
1
-------------------------
1
11 OPEN file                            16.0331   18.9848
1
12 READNEXT                             5.8091    4.1145    4.8043
1
13 READ record                          1.0025    1.2578    2.2033
1
14 READ record with lock                1.3073    1.4268    2.2400
1
15 READV record single field            1.7097    1.8394    2.7643
1
16 MAT READ record                      1.6674    2.7663    4.2651
1
17 MAT READ record with lock            1.7274    2.5897    3.8655
1
18 WRITE record                         5.5698    14.3175   17.0741
1
19 WRITEV record single field           3.4177    11.3639   9.1644
1
20 MAT WRITE                            5.0274    8.2062    14.0674
1
64 LOCK/RELEASE                         2.9251    3.4888
1
 
1
Sub-category averages for Database      4.1997    6.3960    6.7165
1
Sub-category weighted for Database      2.9860    4.2700    5.1107
1
 
1
For sub-category Maths
1
----------------------
1
40 INT function                         4.6520
1
41 LEN function                         6.3610    9.0258    9.1606
1
42 NOT function                         15.3812
1
43 NUM function                         15.3431   8.0343
1
44 MOD function                         2.0864    2.7746
1
47 ADD                                  7.0541    2.5510    43.4129
1
48 ADD strings                          25.7021   19.4031
1
49 SUBTRACT                             7.5873    5.2592    26.2959
1
50 MULTIPLY                             11.7341   0.3433    13.4227
1
51 DIVIDE                               9.3445    1.1640    16.9362
1
 
1
Sub-category averages for Maths         10.5246   6.0694    21.8457
1
Sub-category weighted for Maths         8.5940    3.4681    18.8459
1
 
1
For sub-category String
1
-----------------------
1
09 LOCATE                               6.9447    9.2221    9.5962
1
10 MAT assignment                       2.0557    2.6437    6.1539
1
27 ABS function                         12.4219   4.5631    4.5668
1
28 ASCII function                       2.1026    2.2429    2.6806
1
29 CHAR function                        5.2788    11.1971
1
30 EQUATE to CHAR                       5.3882    5.3389
1
31 COUNT function                       4.4831    9.1205    8.3597
1
33 EBCDIC function                      2.6488    3.3495    3.6813
1
34 Attribute extraction                 5.6241    5.8258    6.9527
1
35 Attribute insertion                  5.8246    8.1989    8.7619
1
36 FIELD function                       6.4066    8.8586    9.2812
1
37 OCONV 100 MR2                        0.7524    0.9117    1.1846
1
38 ICONV 100 MR2                        0.5925
1
39 INDEX function                       5.2097    6.2185    6.2053
1
45 STR function                         11.1757   11.0000   23.0391
1
52 STRING[x,y] extraction               6.3881    5.3775    50.6244
1
53 RELATIONAL comparisons               37.2738   3.3736    10.1574
1
54 MATCHES function                     1.8986    1.3818
1
55 Simple CAT operator                  6.1463    7.2708    49.1838
1
56 Complex CAT operator                 5.6602    6.1491    19.1236
1
60 FORMAT                               0.6081    0.6282
1
61 INSERT function                      9.4399    9.9286    17.4390
1
62 DELETE function                      6.5134    10.5918   12.6129
1
 
1
Sub-category averages for String        6.5582    6.0633    13.8669
1
Sub-category weighted for String        4.3155    4.7811    9.2084
1
 
1
For sub-category Other
1
----------------------
1
26 Cursor function @()                  12.3888   11.8799
1
32 DATE function                        25.6169
1
46 SYSTEM(9) function                   5.1282    3.1149
1
63 PRINT null                           1.9037
1
 
1
Sub-category averages for Other         11.2594   7.4974
1
Sub-category weighted for Other         7.4607    6.0831
1
 
1
================
1
Overall averages                        9.3685    6.7615    12.4060
1
=============
1
Weighted logs                           5.3284    4.7376    7.5926
1

We
are now going to run SINGLEDIFF to compare two benchmarks, one with Case
Independence, the other with default jBASE Emulation. Everything else is the
same. This is a useful example of checking to ensure Case Independence doesn't
add unexpected overhead. In fact we can see that OPEN and CAT are having
problems, and these were logged as issues to be looked in to.

jbase-centos-~/src/Tools/Benchmarks: SINGLEDIFF
1
1     jbase5.5CI
1
2     Centos10.28.32.22
1
3     jbase5.5
1
4     jbase3.4
1
Enter the identifier for the first test  (?) : 1
1
Enter the identifier for the second test (?) : 3
1
 
1
jBASE benchmark comparison report at 13:19:11  29 APR 2016
1
 
1
                                        Reference test         Comparison test
1
Test identifier                         jbase5.5CI             jbase5.5
1
Original date of test                   25 APR 2016 18:19:16   25 APR 2016 17:32:58
1
Hardware                                AMD                    AMD
1
Operating system                        Suse 13                Suse 13
1
Software                                jBASE 5.5              jBASE 5.5
1
Notes                                   With Case Independenc  Latest release with j
1
 
1
The following table shows the relative performance of the two mentioned
1
benchmark runs. For each test there can be between 1 and 3 columns of
1
values, the first being the standard test, the second column (optional)
1
being an extended version and the third column (optional) being a severe
1
test. The value is a ratio between the execution time of the first benchmark
1
result (jbase5.5CI) and the second benchmark result (jbase5.5). Therefore if a
1
value of LESS than 1 is shown, it shows 'jbase5.5CI' is the better performer,
1
whereas a value of GREATER than 1 shows 'jbase5.5' is the better performer.
1
 
1
 
1
For sub-category Assignment
1
---------------------------
1
21 Assign = 0                           0.9572
1
22 Assign = 1                           0.9531
1
23 Assign = 2                           0.9526
1
24 Assign small strings                 0.9604    0.6314    0.9116
1
25 Assign large strings                 0.9734    1.2760    1.0334
1
57 Variable assignment                  0.7896    0.9530    1.0014
1
58 1 dimensioned array extraction       0.9892    0.9977
1
59 2 dimensioned array extraction       0.9977    1.0023
1
 
1
Sub-category averages for Assignment    0.9467    0.9721    0.9821
1
Sub-category weighted for Assignment    0.9445    0.9485    0.9808
1
 
1
For sub-category Branch
1
-----------------------
1
01 FOR/NEXT loop                        1.0039    0.9899    0.9897
1
02 LOOP UNTIL DO REPEAT                 0.9704    1.0086    0.9854
1
03 CALL no parameters                   1.1201
1
04 CALL @ no parameters                 1.0043
1
05 CALL with one parameter              1.0671    1.0526    1.0431
1
06 GOTO                                 0.9808
1
07 GOSUB                                0.9951    0.9907
1
08 IF/THEN                              0.9633    1.0135    0.9996
1
 
1
Sub-category averages for Branch        1.0131    1.0111    1.0045
1
Sub-category weighted for Branch        1.0119    1.0108    1.0042
1
 
1
For sub-category Database
1
-------------------------
1
11 OPEN file                            33.0169   32.9027
1
12 READNEXT                             1.1090    1.0520    1.0462
1
13 READ record                          1.0502    1.0343    1.0426
1
14 READ record with lock                1.0224    1.0468    1.0401
1
15 READV record single field            1.0254    1.0132    1.0329
1
16 MAT READ record                      1.0067    1.0283    1.0012
1
17 MAT READ record with lock            1.0373    1.0611    1.0315
1
18 WRITE record                         1.0422    1.0023    1.0170
1
19 WRITEV record single field           0.9713    0.9524    1.0052
1
20 MAT WRITE                            0.9511    0.9075    0.9350
1
64 LOCK/RELEASE                         1.2347    1.1396
1
 
1
Sub-category averages for Database      3.9516    3.9218    1.0169
1
Sub-category weighted for Database      1.4272    1.4013    1.0163
1
 
1
For sub-category Maths
1
----------------------
1
40 INT function                         0.9449
1
41 LEN function                         0.9324    0.9268    0.9250
1
42 NOT function                         0.9315
1
43 NUM function                         0.9314    0.9227
1
44 MOD function                         0.9350    0.9465
1
47 ADD                                  0.9994    1.0046    0.9787
1
48 ADD strings                          1.0010    0.9913
1
49 SUBTRACT                             0.9895    1.0474    0.9760
1
50 MULTIPLY                             0.9913    0.9897    0.9806
1
51 DIVIDE                               1.0087    0.9706    0.9726
1
 
1
Sub-category averages for Maths         0.9665    0.9750    0.9666
1
Sub-category weighted for Maths         0.9660    0.9742    0.9663
1
 
1
For sub-category String
1
-----------------------
1
09 LOCATE                               0.9151    1.1589    1.1418
1
10 MAT assignment                       0.9633    0.9393    0.9718
1
27 ABS function                         1.0138    1.0399    1.0600
1
28 ASCII function                       0.9978    1.0006    1.0517
1
29 CHAR function                        1.0066    1.0103
1
30 EQUATE to CHAR                       0.9837    0.9740
1
31 COUNT function                       0.8812    0.9409    0.9550
1
33 EBCDIC function                      0.9429    0.9980    1.0297
1
34 Attribute extraction                 5.9617    3.2023    1.0784
1
35 Attribute insertion                  0.9395    0.9404    0.9350
1
36 FIELD function                       0.9587    0.9431    0.9365
1
37 OCONV 100 MR2                        0.9244    0.9247    1.1113
1
38 ICONV 100 MR2                        0.9198
1
39 INDEX function                       1.0957    0.9217    0.9211
1
45 STR function                         0.9447    0.9493    0.9286
1
52 STRING[x,y] extraction               2.0710    1.0370    0.2063
1
53 RELATIONAL comparisons               1.0059    0.9852    0.9797
1
54 MATCHES function                     1.0006    1.0064
1
55 Simple CAT operator                  16.5285   8.5831    10.4505
1
56 Complex CAT operator                 1.0080    1.4658    1.6285
1
60 FORMAT                               1.1129    1.0078
1
61 INSERT function                      1.1174    1.1426    1.0234
1
62 DELETE function                      0.9501    0.9702    0.9931
1
 
1
Sub-category averages for String        1.9236    1.4610    1.5224
1
Sub-category weighted for String        1.2405    1.1750    1.0773
1
 
1
For sub-category Other
1
----------------------
1
26 Cursor function @()                  0.9278    0.9644
1
32 DATE function                        0.9505
1
46 SYSTEM(9) function                   0.9271    0.9746
1
63 PRINT null                           0.9958
1
 
1
Sub-category averages for Other         0.9503    0.9695
1
Sub-category weighted for Other         0.9499    0.9695
1
 
1
================
1
Overall averages                        1.8259    1.7912    1.2398
1
=============
1
Weighted logs                           1.1324    1.1364    1.0332
1

Run the CUBS benchmarks

Decide
how many ports you want to run, and execute CREATE.FILES to ensure enough work
files are pre-created. You can always re-run CREATE.FILES at a later date if
you want to run a larger test.

jbase-centos5-~/src/Tools/Benchmarks: CREATE.FILES
1
Platform is jBASE.
1
ENTER TOTAL NUMBER OF PORTS:?10
1
 
1
THERE ARE 8 PORT(S) THAT DO NOT HAVE DATA!
1
DO YOU WANT TO CREATE DATA FOR THESE PORT(S)? (CR=Y/N): ?Y
1
 
1
NOW CREATING DATA FOR CF2
1
[ 417 ] File /home/fb/src/Tools/Benchmarks/data/CF2]D created , type = J4
1
[ 417 ] File /home/fb/src/Tools/Benchmarks/data/CF2 created , type = J4
1
 
1
[ Lines of output removed for brevity and clarity ]
1

Now
run RUN-SIMULATOR as shown below.

Important:
The first time you run this, the first background job will time out and fail. I
haven't debugged this yet. So let this first test run and ignore the results
(so only run the test for a few seconds).The
timeout will take 75 seconds -- please be patient!

jbase-centos5-~/src/Tools/Benchmarks: RUN-SIMULATOR
1
Platform is jBASE running under Unix.
1
 
1
THIS WILL START THE SIMULATOR ON THE NUMBER OF PORTS WHICH YOU DESIGNATE.
1
HOW MANY PORTS DO YOU WISH TO HAVE RUN? (CR=15,/,P,S,?): 10
1
 
1
ENTER TIME TO RUN THE TESTS FOR? (CR=60) :
1
 
1
DO YOU WISH TO TEST FIRST 1 PORT, THEN 2 PORTS, AND SO
1
ON UP TO 10 PORTS? (Y,CR=N,/):
1
 
1
 
1
OK TO CONTINUE? (CR=Y,N):
1
 
1
NOW STARTING PORT 1.STMT=jpq -Jb /home/fb/src/Tools/Benchmarks/data/MD/TESTER
1
 
1
[ Lines of output removed for brevity and clarity]
1
 
1
NOW STARTING PORT 10.STMT=jpq -Jb /home/fb/src/Tools/Benchmarks/data/MD/TESTER
1
 
1
SIMULATOR NOW RUNNING ON 10 PORT(S) FOR 60 SECONDS
1
 
1
ELAPSED TIME= 00:00:60
1
 
1
13:31:32  29 APR 2016     REPORT ON SIMULATOR USAGE
1
 
1
PORT   START-TM   END-TIME   SECONDS   #TRANS   TRANS/SEC
1
 
1
   1   13:30:31   13:31:31        60    61200   1020.0000
1
   2   13:30:31   13:31:31        60    50400    840.0000
1
   3   13:30:31   13:31:31        60    34650    577.5000
1
   4   13:30:31   13:31:31        60    41400    690.0000
1
   5   13:30:31   13:31:31        60    31950    532.5000
1
   6   13:30:31   13:31:31        60    32400    540.0000
1
   7   13:30:31   13:31:31        60    40950    682.5000
1
   8   13:30:31   13:31:31        60    53550    892.5000
1
   9   13:30:31   13:31:31        60    36900    615.0000
1
  10   13:30:31   13:31:31        60    61650   1027.5000
1
 
1
****************************************************************
1
*                                                              *
1
*           10  PORTS PROCESSED                                *
1
*        60.00  AVERAGE NUMBER OF SECONDS TO RUN PER PORT      *
1
*       741.75  AVG TRANSACTIONS/SEC/PORT                      *
1
*       445050  TOTAL NUMBER OF TRANSACTIONS PROCESSED         *
1
*                                                              *
1
*      7417.50  TOTAL NUMBER OF TRANSACTIONS PROCESSED/SECOND  *
1
*             (THIS IS THE VALUE THAT IS USED FOR COMPARISONS) *
1
*                                                              *
1
****************************************************************
1
 
1
DO YOU WISH TO SEND A COPY OF THIS REPORT TO A HOLDFILE? (CR=Y/N): N
1
 
1
DO YOU WISH TO RUN ANOTHER TEST? (CR=Y/N): N
1

# 5. Results so far

As
mentioned earlier, the results are highly sensitive and company confidential.
Do not give them out unless expressly authorized.

So,
finger wagging over, here are the results.

The
results for the SINGLE instruction benchmark are in the RESULTS directory. As
shown before, you can use SINGLEDIFF to display a comparison with the reference
results (meaning you effectively just display the results of a benchmark run),
or use SINGLEDIFF to compare to sets of results.

#